# V U This interactive TV and projector walkthroughs

Open https://vuthis.com on the display; connect a phone, tablet or laptop using the display code at https://vuthis.com/r.

## Connect a Phone or Laptop to TV Without HDMI: Interactive Walkthrough

Your chosen content on the room screen. The controls stay with you.

1. **Open vuthis.com on the TV or projector** Open vuthis.com in the display browser. For a projector, use its browser or the computer already connected to it. Keep the connection code on screen. Result: The screen is ready for a controller.
2. **Connect your phone, tablet or laptop** Scan the screen QR code with your phone. On a laptop or tablet, open vuthis.com/r and enter the screen code. Both devices need internet; they can use different networks. Result: The content controls are on your device.
3. **Choose what the room should see** Choose Document for a PDF, Photos for pictures, Text for a short message or another screen feature. The TV displays your selected content. Result: You have selected the right content mode.
4. **Prepare the content on your controller** Select the intended file or enter the message. Check the controller preview before you put it in front of the room. Result: The intended content is ready.
5. **Choose Show now** Tap Show now to put the selected content on the display. Keep your controls on the phone or laptop while the audience sees the result. Result: The room sees the selected content.
6. **Follow the feature walkthrough** Choose the PDF, slides, photos or screen-message guide below for the exact controls. Both devices can use different internet connections. Result: You can change the display from the controller.

[Interactive Connect a Phone or Laptop to TV Without HDMI: Interactive Walkthrough](https://vuthis.github.io/walkthrough-connect-phone-laptop-to-tv.html) · [Printable PDF](https://vuthis.github.io/walkthrough-connect-phone-laptop-to-tv.pdf) · [Use V U This](https://vuthis.com)

## Show a PDF on TV or a Projector Without HDMI: Interactive Guide

A clean PDF on the display, with page changes controlled from your device.

1. **Open vuthis.com on the TV or projector** Open vuthis.com in the display browser. For a projector, use its browser or the computer already connected to it. Keep the connection code on screen. Result: The screen is ready for a controller.
2. **Connect your phone, tablet or laptop** Scan the screen QR code with your phone. On a laptop or tablet, open vuthis.com/r and enter the screen code. Both devices need internet; they can use different networks. Result: The content controls are on your device.
3. **Choose Document and select your PDF** On the connected controller, choose Document and select the PDF you want to present. Check that it is the intended document. Result: The PDF is selected on the controller.
4. **Tap Show now to display the PDF** Choose Show now. The PDF appears on TV or the projector while its controls remain on your phone or laptop. Result: The audience sees the document.
5. **Use Fit page or Fit width** Fit page keeps the complete page visible. Fit width enlarges a tall page for reading. Choose the view that makes the important text legible. Result: The page is framed for your audience.
6. **Turn pages from your phone or laptop** Use Previous and Next. In Fit width, the controls move through a tall page a screenful at a time before changing pages. Result: You can present the document at your own pace.

[Interactive Show a PDF on TV or a Projector Without HDMI: Interactive Guide](https://vuthis.github.io/walkthrough-pdf-on-tv-projector.html) · [Printable PDF](https://vuthis.github.io/walkthrough-pdf-on-tv-projector.pdf) · [Use V U This](https://vuthis.com)

## PowerPoint, Google Slides and Keynote on TV Without HDMI

Slide pages on the room screen. You decide when the next one appears.

1. **Open vuthis.com on the TV or projector** Open vuthis.com in the display browser. For a projector, use its browser or the computer already connected to it. Keep the connection code on screen. Result: The screen is ready for a controller.
2. **Connect your phone, tablet or laptop** Scan the screen QR code with your phone. On a laptop or tablet, open vuthis.com/r and enter the screen code. Both devices need internet; they can use different networks. Result: The content controls are on your device.
3. **Export your presentation as PDF** In PowerPoint, Google Slides, Keynote or Canva, export or download the presentation as PDF. Check the exported page order and layout. Result: Your presentation is ready as a PDF.
4. **Choose Document, then Show now** Select the exported slide PDF in Document and choose Show now. The presentation pages appear on the shared screen. Result: The first slide page is on the display.
5. **Choose Fit page for complete slides** Use Fit page so the entire slide is visible. A landscape presentation usually suits a widescreen TV or projector. Result: The whole slide is visible.
6. **Advance the slide pages as you present** Use Previous and Next on the controller. Keep notes and other device activity on your laptop or phone while the room sees the selected PDF. Result: The presentation moves at your pace.

[Interactive PowerPoint, Google Slides and Keynote on TV Without HDMI](https://vuthis.github.io/walkthrough-powerpoint-slides-on-tv.html) · [Printable PDF](https://vuthis.github.io/walkthrough-powerpoint-slides-on-tv.pdf) · [Use V U This](https://vuthis.com)

## Show Photos and Run a TV Slideshow Without Casting

The photos you choose on the TV. Move through them yourself or let the slideshow run.

1. **Open vuthis.com on the TV or projector** Open vuthis.com in the display browser. For a projector, use its browser or the computer already connected to it. Keep the connection code on screen. Result: The screen is ready for a controller.
2. **Connect your phone, tablet or laptop** Scan the screen QR code with your phone. On a laptop or tablet, open vuthis.com/r and enter the screen code. Both devices need internet; they can use different networks. Result: The content controls are on your device.
3. **Choose Photos and add your pictures** Choose Photos and select the images you want everyone to see. Drag the photo list into the intended order before showing it. Result: Only the intended photo set is selected.
4. **Choose Show now and check the first photo** Tap Show now. Use Previous and Next to move through individual pictures from the controller. Result: The selected photo appears on TV.
5. **Set Slideshow, timing and Start over** Turn Slideshow on for automatic advance. Set Seconds per photo and choose Start over when the set should repeat. Result: The photos advance at the selected pace.
6. **Choose Fit or Fill and control playback** Fit keeps the whole image. Fill covers the screen and can crop edges. Pause or Resume the slideshow from your device when the room needs a closer look. Result: Your slideshow has the intended framing and pace.

[Interactive Show Photos and Run a TV Slideshow Without Casting](https://vuthis.github.io/walkthrough-photos-slideshow-on-tv.html) · [Printable PDF](https://vuthis.github.io/walkthrough-photos-slideshow-on-tv.pdf) · [Use V U This](https://vuthis.com)

## Display Large Text and Welcome Messages on TV

One clear message, readable from across the room.

1. **Open vuthis.com on the TV or projector** Open vuthis.com in the display browser. For a projector, use its browser or the computer already connected to it. Keep the connection code on screen. Result: The screen is ready for a controller.
2. **Connect your phone, tablet or laptop** Scan the screen QR code with your phone. On a laptop or tablet, open vuthis.com/r and enter the screen code. Both devices need internet; they can use different networks. Result: The content controls are on your device.
3. **Choose Text and write the message** Choose Text. Enter the short message the room needs: Welcome, Registration this way, Meeting in room 4 or Back at 2:00. Result: The message says one clear thing.
4. **Choose S, M, L or Max** Use L for one large line or Max when the message should fill the screen and may wrap. S and M leave more space around the words. Result: The message has the intended scale.
5. **Set the position and colours** Choose one of nine positions and a readable text/background combination. Keep the words clear from the farthest audience position. Result: The layout suits the screen and the room.
6. **Choose Show now and update when needed** Show the message on the display. Change the wording, position or available styling from the controller when the next instruction is needed. Result: The room has the current instruction.

[Interactive Display Large Text and Welcome Messages on TV](https://vuthis.github.io/walkthrough-large-text-on-tv.html) · [Printable PDF](https://vuthis.github.io/walkthrough-large-text-on-tv.pdf) · [Use V U This](https://vuthis.com)

## Turn a TV into a Digital Notice Board: Interactive Walkthrough

A structured announcement that tells everyone what changed and what to do next.

1. **Open vuthis.com on the TV or projector** Open vuthis.com in the display browser. For a projector, use its browser or the computer already connected to it. Keep the connection code on screen. Result: The screen is ready for a controller.
2. **Connect your phone, tablet or laptop** Scan the screen QR code with your phone. On a laptop or tablet, open vuthis.com/r and enter the screen code. Both devices need internet; they can use different networks. Result: The content controls are on your device.
3. **Choose Announcement and write the title** Choose Announcement. Give the notice a short title such as Session change, Welcome or Today at reception. Result: The main point is immediately clear.
4. **Add the subtitle and footer** Use the subtitle for the useful detail and the footer for a time, room or next action. For example: Workshop moved to Hall B; Follow signs upstairs. Result: The notice has a readable information hierarchy.
5. **Choose colours and check the layout** Choose readable colours. If your current product access includes an image, add one when it helps explain the notice. Preview how the words fit. Result: The important detail stands out.
6. **Show the notice and keep it current** Choose Show now. Update the announcement from the controller when plans change, then clear or replace it when it no longer applies. Result: Visitors see the current announcement.

[Interactive Turn a TV into a Digital Notice Board: Interactive Walkthrough](https://vuthis.github.io/walkthrough-announcements-notice-board.html) · [Printable PDF](https://vuthis.github.io/walkthrough-announcements-notice-board.pdf) · [Use V U This](https://vuthis.com)

## Show a Full-Screen Clock or World Time on TV

One large labelled clock for the time the room needs to follow.

1. **Open vuthis.com on the TV or projector** Open vuthis.com in the display browser. For a projector, use its browser or the computer already connected to it. Keep the connection code on screen. Result: The screen is ready for a controller.
2. **Connect your phone, tablet or laptop** Scan the screen QR code with your phone. On a laptop or tablet, open vuthis.com/r and enter the screen code. Both devices need internet; they can use different networks. Result: The content controls are on your device.
3. **Choose Clock and the time source** Choose Clock. Select Local time for the display browser time zone, or Time zone for another place. Result: The clock follows the intended location.
4. **Pick the zone and add a label** For another time zone, choose the place the room needs to follow. Add a label such as New York, London office or Event time. Result: Everyone knows which time they are seeing.
5. **Set 12/24-hour format, seconds and date** Choose the time format. Turn seconds or the date on when they are useful, and select readable colours. Result: The time detail suits the room.
6. **Choose Show now** Put the clock on the display. Change its settings from the controller while the screen keeps the time visible. Result: The room has one clear shared clock.

[Interactive Show a Full-Screen Clock or World Time on TV](https://vuthis.github.io/walkthrough-clock-world-time-on-tv.html) · [Printable PDF](https://vuthis.github.io/walkthrough-clock-world-time-on-tv.pdf) · [Use V U This](https://vuthis.com)

## Countdown, Count-Up and Presentation Timer on TV

A clean timer for the room, with timing controls on your device.

1. **Open vuthis.com on the TV or projector** Open vuthis.com in the display browser. For a projector, use its browser or the computer already connected to it. Keep the connection code on screen. Result: The screen is ready for a controller.
2. **Connect your phone, tablet or laptop** Scan the screen QR code with your phone. On a laptop or tablet, open vuthis.com/r and enter the screen code. Both devices need internet; they can use different networks. Result: The content controls are on your device.
3. **Choose Timer and a mode** Choose Down for a set duration, Up for elapsed time or To a time for a fixed clock-time target. Result: The timer matches the activity.
4. **Set the duration or target and label** Enter the duration or finishing time. Add a label such as Break, Questions, Presentation time or Group work. Choose readable colours. Result: The room knows what the time refers to.
5. **Choose Show now and run the timer** Show the timer on the shared display. The audience sees the large timer while the controller keeps its buttons. Result: The room can follow the time.
6. **Pause, resume or restart the appropriate mode** Down and Up support Pause, Resume and Restart. To a time stays tied to the fixed target. At the end of a countdown, the timer and background colours swap. Result: The timer follows the event rather than distracting from it.

[Interactive Countdown, Count-Up and Presentation Timer on TV](https://vuthis.github.io/walkthrough-presentation-timer-on-tv.html) · [Printable PDF](https://vuthis.github.io/walkthrough-presentation-timer-on-tv.pdf) · [Use V U This](https://vuthis.com)

## Display a Now-Serving Number or Tally Counter on TV

The current number, large and labelled, with the controls kept off the public screen.

1. **Open vuthis.com on the TV or projector** Open vuthis.com in the display browser. For a projector, use its browser or the computer already connected to it. Keep the connection code on screen. Result: The screen is ready for a controller.
2. **Connect your phone, tablet or laptop** Scan the screen QR code with your phone. On a laptop or tablet, open vuthis.com/r and enter the screen code. Both devices need internet; they can use different networks. Result: The content controls are on your device.
3. **Choose Counter and write the label** Choose Counter. Add a label such as Now serving, Places remaining, People checked in or Items collected. Result: The number has clear context.
4. **Set the starting value and Step** Choose where the count begins. Set Step to the amount added or subtracted by one tap: one for individuals or a larger value for batches. Result: Each tap has the intended effect.
5. **Choose Show now** Show the labelled counter on the TV or projector. Keep the increment, decrement and reset buttons on the controller. Result: The room sees one clear current number.
6. **Count up, count down or Reset** Use + Step or - Step as events happen. Reset returns to your chosen starting value. Check the display before calling the next turn. Result: The screen follows the operator count.

[Interactive Display a Now-Serving Number or Tally Counter on TV](https://vuthis.github.io/walkthrough-now-serving-tally-counter.html) · [Printable PDF](https://vuthis.github.io/walkthrough-now-serving-tally-counter.pdf) · [Use V U This](https://vuthis.com)

## Display a Website QR Code on TV for Menus, Agendas and Feedback

One clear code on the screen, taking guests to the page they need.

1. **Open vuthis.com on the TV or projector** Open vuthis.com in the display browser. For a projector, use its browser or the computer already connected to it. Keep the connection code on screen. Result: The screen is ready for a controller.
2. **Connect your phone, tablet or laptop** Scan the screen QR code with your phone. On a laptop or tablet, open vuthis.com/r and enter the screen code. Both devices need internet; they can use different networks. Result: The content controls are on your device.
3. **Choose QR code, then URL** Choose the QR-code feature and select URL for a web page. Use the current product interface for access to this feature. Result: The QR code is set up for a website link.
4. **Enter the full destination address** Enter the complete https:// or http:// address for the menu, agenda, form or other page. Check that it opens for the intended audience. Result: The destination is correct.
5. **Add a caption and choose Show now** Use a caption that explains the result, such as View today's agenda or Tell us how we did. Show the code on the display. Result: Visitors know why they should scan.
6. **Test from the audience position** Scan the displayed code with a separate phone. Confirm that it opens the intended page and the useful information is accessible. Result: The code leads to the right next action.

[Interactive Display a Website QR Code on TV for Menus, Agendas and Feedback](https://vuthis.github.io/walkthrough-website-qr-code-on-tv.html) · [Printable PDF](https://vuthis.github.io/walkthrough-website-qr-code-on-tv.pdf) · [Use V U This](https://vuthis.com)

## Show a Guest Wi-Fi QR Code on a Hotel or Meeting-Room TV

Guest-network joining details in one scannable code on the screen.

1. **Open vuthis.com on the TV or projector** Open vuthis.com in the display browser. For a projector, use its browser or the computer already connected to it. Keep the connection code on screen. Result: The screen is ready for a controller.
2. **Connect your phone, tablet or laptop** Scan the screen QR code with your phone. On a laptop or tablet, open vuthis.com/r and enter the screen code. Both devices need internet; they can use different networks. Result: The content controls are on your device.
3. **Choose QR code, then Wi-Fi** Choose QR code and select Wi-Fi. Use guest-network details you are authorised to show to this audience. Result: The code is set up for guest-network access.
4. **Enter the network and security details** Enter the network name exactly. Choose the correct security type and add the password when the guest network requires one. Result: The joining details match the guest network.
5. **Add a caption and show the code** Use a clear caption such as Guest Wi-Fi: scan to join. Choose Show now and check the code is visible where guests stand. Result: Guests can identify the joining code.
6. **Test joining with another phone** Scan from a separate compatible phone. Confirm it offers the correct network and complete any venue sign-in steps that network requires. Result: The guest joining route has been tested.

[Interactive Show a Guest Wi-Fi QR Code on a Hotel or Meeting-Room TV](https://vuthis.github.io/walkthrough-guest-wifi-qr-on-tv.html) · [Printable PDF](https://vuthis.github.io/walkthrough-guest-wifi-qr-on-tv.pdf) · [Use V U This](https://vuthis.com)

## Build a Digital Signage Playlist on TV Without a New Media Player

One screen moving through the content you prepared, in the order the room needs.

1. **Open vuthis.com on the TV or projector** Open vuthis.com in the display browser. For a projector, use its browser or the computer already connected to it. Keep the connection code on screen. Result: The screen is ready for a controller.
2. **Connect your phone, tablet or laptop** Scan the screen QR code with your phone. On a laptop or tablet, open vuthis.com/r and enter the screen code. Both devices need internet; they can use different networks. Result: The content controls are on your device.
3. **Create content and choose Add to queue** Prepare an item in its feature, then choose Add to queue instead of Show now. Repeat for the photos, PDF, notice, clock, timer or QR code the display needs. Result: Your screen content is collected in Queue.
4. **Drag the Queue into the right order** Arrange the items in the sequence the audience should see. Remove outdated items. Use an item's Show now when something needs the screen immediately. Result: The running order matches your event or venue.
5. **Choose manual play, Auto and Loop** Use Play queue for manual progression. Turn Auto on for automatic advance, set Seconds per item and enable Loop when the sequence should repeat. Result: The display follows your chosen playback pattern.
6. **Preview the whole sequence** Watch the transitions. Slideshows and countdowns can hold Auto until their own finish; ordinary items use the Queue timing. The display continues until the V U This session ends. Result: The screen is ready for the audience.

[Interactive Build a Digital Signage Playlist on TV Without a New Media Player](https://vuthis.github.io/walkthrough-digital-signage-playlist.html) · [Printable PDF](https://vuthis.github.io/walkthrough-digital-signage-playlist.pdf) · [Use V U This](https://vuthis.com)